INTERNET-DRAFT Ron Bergman Dataproducts Corp. Harry Lewis IBM Corp. February 19, 1998 Printer Finishing MIB Expires August 19, 1998 Status of this Memo This document is an Internet-Draft. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress". To learn the current status of any Internet-Draft, please check the "1id-abstracts.txt" listing contained in the Internet-Drafts Shadow Directories on ftp.is.co.za (Africa), nic.nordu.net (Europe), munnari.oz.au (Pacific Rim), ds.internic.net (US East Coast), or ftp.isi.edu (US West Coast). Abstract This document defines a printer industry standard SNMP MIB for the management of printer finishing device subunits. The finishing device subunits applicable to this MIB are an integral part of the Printer System. This MIB does not apply to a Finisher Device that is external to a Printer System. The Finisher MIB is defined as an extension of the Printer MIB [PrtMIB] and it is expected that the information defined in this document will be incorporated into a future update of the Printer MIB. Bergman, Lewis [page 1] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 TABLE OF CONTENTS 1.0 INTRODUCTION......................................................2 1.1 Scope.............................................................2 1.2 Rational..........................................................3 2.0 TERMINOLOGY.......................................................3 3.0 FINISHER SUBUNITS INTEGRATED INTO THE PRINTER MODEL:..............4 4.0 PRINTER FINISHING MIB SPECIFICATION...............................4 5.0 REFERENCES.......................................................26 6.0 AUTHORS..........................................................26 1.0 INTRODUCTION This document describes an SNMP Management Information Base (MIB) to provide for the management of in-line post-processing in a fashion that is currently provided for printers, using the Printer MIB [PrtMIB]. The Printer Finishing MIB includes the following features: - Provides the status of the finishing device. - Manages the features and configuration of the finishing device. - Enables and disables the finishing operations. - Allows unsolicited status from the finishing device. 1.1 Scope This document provides a robust set of finishing devices, features, and functions, based upon today's state of the art of in-line finishing. Since finishing typically accompanies higher speed network printers and copiers, in contrast to simple desktop devices, no attempt is made to limit the scope to "bare minimum". On the other hand, the Printer Finishing MIB does not duplicate the production mail preparation, custom insertion, franking, and reprints that are covered by the DMTF Large Mailing Operations standard [LMO]. Information supplied by the Printer Finishing MIB may be utilized by printer and finisher management applications engaged in monitoring status and managing configuration, and also used by print and finishing submission applications which are engaged in: - print-file-level finishing operations that are applied to a complete print file, - document-level finishing operations that are applied individually to each document in the print file, - document-level finishing operations that are applied to a selected document in the print file. Bergman, Lewis Informational [page 2] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 Note that not all combinations of finishing operations are compatible. Compatible combinations of finishing operations are device specific. 1.2 Rational The Printer MIB [PrtMIB] is now successfully deployed in a large segment of the network printer market. SNMP and/or HTTP enabled printers and software management applications are growing in numbers. There is an increase in the availability of network printers and copiers that include in-line finishing operations. Thus a well defined and ordered set of finishing objects is now necessary for printer management. The printer model defined in the Printer MIB includes finishing operations and the MIB was designed to later incorporate finisher objects or to be referenced by a future Finisher MIB. 2.0 TERMINOLOGY Where appropriate, the Printer Finishing MIB will conform to the terminology, syntax, and semantics from the DMTF Large Mailing Operations standard [LMO], the Internet Printing Protocol [IPP], and/or the ISO Document Printing Application [DPA]. Finisher Input: An input tray on the finisher and not otherwise associated with the printer. An example of a finisher input is a tray that holds finishing "inserts". Finisher Output: The output of the finisher. Because processing is in- line, the finisher outputs are a direct extension of the set of printer outputs. Finishing Operation Axis: Defined by DPA as the axis to which some finishing operations are applied to or referenced from. An example is the axis for a fold operation. Finishing Axis Offset: The offset from a finishing operation axis at which the finishing operation takes place or is applied. Bergman, Lewis Informational [page 3] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 3.0 FINISHER SUBUNITS INTEGRATED INTO THE PRINTER MODEL: The Printer Finisher Device subunits receive media from one or more Printer Media Path subunits and deliver the media to one or more Printer Output subunits after the completion of the finishing operations. The Printer Model, as described in the Printer MIB [PRTMIB], is modified adding the finisher subunit(s) and finisher supplies as follows: +-----+ +------+ +--------+ +------+ | | | | | | | | +-----+ | +-----+ +------+ | +------+ +--------+ | +------+ | |Input|-+ +------+| |Marker|-+ +------+| |Finisher|-+ |Output|-+ | |===>| |+<==>| |<==>| |+==>| |===>| | +-----+ +-+ +-+ +------+ +-+ +-+ +--------+ +------+ \ | || | || || \ | || | || || \ | || | || +----------+ +-------+ | |+--------------------| || | Finisher |-+ | | | +---------------------+ || | Supplies | | +-------+ | | Media Path |+ +----------+ | | Media |-+ +---------------------------+ | | |(opt.) | +----------+ +-------+ 4.0 PRINTER FINISHING MIB SPECIFICATION Bergman, Lewis Informational [page 4] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 Finisher-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, experimental, Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF hrDeviceIndex FROM HOST-RESOURCES-MIB PrtSubUnitStatusTC, PrtInputTypeTC, PrtMarkerSuppliesSupplyUnitTC, PrtCapacityUnitTC, prtOutputIndex, PrtMarkerSuppliesClassTC, PresentOnOff, PrtMediaPathIndex FROM Printer-MIB finisherMIB MODULE-IDENTITY LAST-UPDATED "9801120000Z" ORGANIZATION "IETF Printer MIB Working Group" CONTACT-INFO "Ron Bergman Dataproducts Corp. 1757 Tapo Canyon Road Simi Valley, CA 91063-3394 rbergma@dpc.com Send comments to the printmib WG using the Finisher MIB Project (FIN) Mailing List: fin@pwg.org For further information, access the PWG web page under 'FIN': http://www.pwg.org/ Implementers of this specification are encouraged to join the fin mailing list in order to participate in discussions on any clarifications needed and registration proposals being reviewed in order to achieve consensus." DESCRIPTION "The MIB module for management of printer finisher units. The Finisher MIB is an extension of the Printer MIB." ::= { mib-2 43 } -- Textual conventions for this MIB module FinDeviceTypeTC ::= TEXTUAL-CONVENTION -- This is a type 2 enumeration. STATUS current DESCRIPTION "The defined finishing device subunit operation enumerations." SYNTAX INTEGER { other(1), Bergman, Lewis Informational [page 5] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 unknown(2), stitcher(3), folder(4), binder(5), trimmer(6), dieCutter(7), puncher(8), perforater(9), slitter(10), separationCutter(11), imprinter(12), wrapper(13), bander(14) } finAttributeTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention defines a set of enums for use in the finDeviceAttributeTable. The data type tag definitions 'INTEGER:' or 'OCTETS', indicate if the attribute can be represented using the object finDeviceAttributeAsInteger or the object finDeviceAttributeAsOctets, respectively. In some cases, a choice between the two data types is possible and for a few attributes both objects may be required at the same time to properly present the value. The attribute types defined at the time of completion of this specification are:" -- finAttributeTypeIndex Data type -- --------------------- --------- -- other(1), Integer32 -- AND/OR -- OCTET STRING (SIZE(0..63)) -- INTEGER: and/or OCTETS: An attribute that is not currently -- approved and registered. -- stitchingType(3), FinStitchingTypeTC -- INTEGER: Provides additional information regarding the -- stitching operation. -- bindingType(4), FinBindingTypeTC -- INTEGER: Provides additional information regarding the -- binding operation. -- slittingType(5), FinSlittingTypeTC -- INTEGER: Provides additional information regarding the -- slitting operation. -- foldingType(6), FinFoldingTypeTC Bergman, Lewis Informational [page 6] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 -- INTEGER: Provides additional information regarding the -- folding operation. -- wrappingType(7), FinWrappingTypeTC -- INTEGER: Provides additional information regarding the -- wrapping operation. -- punchHoleType(8), FinPunchHoleTypeTC -- INTEGER: Provides information regarding the shape of the -- punched hole. -- punchHoleSizeMaxDim(9), Integer32 -- INTEGER: Defines the size of the punched hole in the -- maximum dimension. This dimension shall always be -- measured parallel to either the long edge or the short -- edge of the media and the maximum dimension will always be -- measured 90 degrees from the minimum dimension. The -- minimum and maximum dimensions may be identical. -- punchHoleSizeMinDim(10), Integer32 -- INTEGER: Defines the size of the punched hole in the -- minimum dimension. This dimension shall always be -- measured parallel to either the long edge or the short -- edge of the media and the minimum dimension will always be -- measured 90 degrees from the maximum dimension. The -- minimum and maximum dimensions may be identical. -- punchPattern(11), FinPunchPatternTC -- INTEGER: Defines the hole pattern produced by the punch -- operation. -- finDeviceMoreAssociatedOutputs(12) Integer32 -- INTEGER: Used for situations where the printer system has -- more than 31 output subunits to augment the object -- finDeviceAssociatedOutputs. This is a bit map integer -- which identifies the printer output subunits this finisher -- device subunit can deposit processed media. The least -- significant bit correspond to the prtOutputIndex of 32. SYNTAX INTEGER { other(1), stitchingType(3), bindingType(4), slittingType(5), foldingType(6), wrappingType(7), punchHoleType(8), punchHoleSizeMaxDim(9), punchHoleSizeMinDim(10), punchPattern(11), finDeviceMoreAssociatedOutputs(12) Bergman, Lewis Informational [page 7] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 } FinStitchingTypeTC ::= TEXTUAL-CONVENTION -- This is a type 2 enumeration. STATUS current DESCRIPTION "The defined stitching type enumerations." SYNTAX INTEGER { other(1), unknown(2), staple(3), stapleTopLeft(4), stapleBottomLeft(5), stapleTopRight(6), stapleBottomRight(7), saddleStitch(8), edgeStitch(9), stitch(10) } FinBindingTypeTC ::= TEXTUAL-CONVENTION -- This is a type 2 enumeration. STATUS current DESCRIPTION "The defined binding type enumerations." SYNTAX INTEGER { other(1), unknown(2), bind(3), tape(4), plastic(5), velo(6), perfect(7), spiral(8) } FinSlittingTypeTC ::= TEXTUAL-CONVENTION -- This is a type 2 enumeration. STATUS current DESCRIPTION "The defined slitting type enumerations." SYNTAX INTEGER { other(1), unknown(2), slit(3), slitAndSeparate(4), slitAndMerge(5) } FinOutputTypeTC ::= TEXTUAL-CONVENTION -- This is a type 2 enumeration. Bergman, Lewis Informational [page 8] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 STATUS current DESCRIPTION "The defined output type enumerations." SYNTAX INTEGER { other(1), unknown(2), removableBin(3), unremovableBin(4), continuousRollDevice(5), mailbox(6), continuousFanFold(7), conveyer(8), smartCart(9) } FinSupplyTypeTC ::= TEXTUAL-CONVENTION -- This is a type 2 enumeration that is an extension to the -- Printer MIB textual convention PrtMarkerSuppliesTypeTC. -- ****************************************************************** -- ISSUE: Should this just define new enums added to the Printer MIB -- or keep it separate? If separate, should the duplicates -- from the Printer MIB be eliminated? -- ****************************************************************** STATUS current DESCRIPTION "The defined finishing supply type enumerations." SYNTAX INTEGER { other(1), unknown(2), toner(3), wasteToner(4), ink(5), inkCartridge(6), inkRibbon(7), wasteInk(8), opc(9), --photo conductor developer(10), fuserOil(11), solidWax(12), ribbonWax(13), wasteWax(14), fuser(15), coronaWire(16), fuserOilWick(17), cleanerUnit(18), fuserCleaningPad(19), transferUnit(20), tonerCartridge(21), fuserOiler(22), --Supply types 3 to 22 are from the Bergman, Lewis Informational [page 9] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 --Printer MIB water(23), wasteWater(24), glueWaterAdditive(25), wastePaper(26), bindingTape(27), bandingTape(28), stitchingWire(29), shrinkWrap(30), paperWrap(31), staples(32), inserts(33), covers(34) } FinStitchingTypeTC ::= TEXTUAL-CONVENTION -- This is a type 2 enumeration. STATUS current DESCRIPTION "The defined stitching type enumerations." SYNTAX INTEGER { other(1), unknown(2), staple(3), stapleTopLeft(4), stapleBottomLeft(5), stapleTopRight(6), stapleBottomRight(7), saddleStitch(8), edgeStitch(9), stitch(10) } FinBindingTypeTC ::= TEXTUAL-CONVENTION -- This is a type 2 enumeration. STATUS current DESCRIPTION "The defined binding type enumerations." SYNTAX INTEGER { other(1), unknown(2), bind(3), tape(4), plastic(5), velo(6), perfect(7), spiral(8) } FinSlittingTypeTC ::= TEXTUAL-CONVENTION -- This is a type 2 enumeration. Bergman, Lewis Informational [page 10] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 STATUS current DESCRIPTION "The defined slitting type enumerations." SYNTAX INTEGER { other(1), unknown(2), slit(3), slitAndSeparate(4), slitAndMerge(5) } -- Finisher Device Group (Mandatory) -- -- A printer may support zero or more finishing subunits. A -- finishing device subunit may be associated with one or more -- output subunits and one or more media path subunits. finDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF FinDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table defines the finishing device subunits, including information regarding possible configuration options and the status for each finisher device subunit." ::= { finisherMIB 18 } finDeviceEntry OBJECT-TYPE SYNTAX FinDeviceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "There is an entry in the finishing device table for each possible finisher operation." INDEX { hrDeviceIndex, finDeviceIndex } ::= { finDevicesTable 1 } FinDeviceEntry ::= SEQUENCE { finDeviceIndex Integer32, finDeviceType FinDeviceTypeTC, finDevicePresentOnOff PresentOnOff, finDeviceCapacityUnit PrtCapacityUnitTC, finDeviceMaxCapacity Integer32, finDeviceRemainingCapacity Integer32, finDeviceAssociatedMediaPaths Integer32, finDeviceAssociatedOutputs Integer32, finDeviceStatus PrtSubUnitStatusTC, finDeviceDescription OCTET STRING finDeviceName OCTET STRING, finDeviceVendorName OCTET STRING, Bergman, Lewis Informational [page 11] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 finDeviceModel OCTET STRING, finDeviceVersion OCTET STRING, finDeviceSerialNumber OCTET STRING, } finDeviceIndex OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value used to identify a finisher operation. Although these values may change due to a major reconfiguration of the printer system (e.g. the addition of new finishing operations), the values are normally expected to remain stable across successive power cycles." ::= { finDeviceEntry 1 } finDeviceType OBJECT-TYPE SYNTAX FinDeviceTypeTC MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the type of finishing operation associated with this table row entry." ::= { finDeviceEntry 2 } finDevicePresentOnOff OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if this finishing device subunit is available and whether the device subunit is enabled." ::= { finDeviceEntry 3 } finDeviceCapacityUnit OBJECT-TYPE SYNTAX PrtCapacityUnitTC MAX-ACCESS read-only STATUS current DESCRIPTION "The unit of measure for specifying the capacity of this finisher device subunit." ::= { finDeviceEntry 4 } finDeviceMaxCapacity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum capacity of this finisher device subunit in finDeviceCapacityUnits. If the device can reliably sense Bergman, Lewis Informational [page 12] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 this value, the value is sensed by the finisher device and is read-only: otherwise the value may be written by a management or control console application. The value (-1) means other and specifically indicates that the device places no restrictions on this parameter. The value (-2) means unknown." ::= { finDeviceEntry 5 } finDeviceCurrentCapacity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The current capacity of this finisher device subunit in finDeviceCapacityUnits. If the device can reliably sense this value, the value is sensed by the finisher and is read-only: otherwise the value may be written by a management or control console application. The value (-1) means other and specifically indicates that the device places no restrictions on this parameter. The value (-2) means unknown." ::= { finDeviceEntry 6 } finDeviceAssociatedMediaPaths OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the media paths which can supply media for this finisher device. The value of this object is a bit map with each position representing the value of a prtMediaPathIndex. For a media path that can be a source for this finisher device subunit, the bit position equal to 2 raised to the power of one less than the value of prtMediaPathIndex will be set. For example, a value of hexadecimal 21 indicates the media paths with a prtMediaPathIndex of 1 or 6 will supply media to this finisher device subunit. The most significant bit position SHALL not be used, which allows a maximum of 31 media paths to be defined." ::= { finDeviceEntry 7 } finDeviceAssociatedOutputs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the printer output subunits this finisher device subunit services. The value of this object is a bit map Bergman, Lewis Informational [page 13] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 with each position representing the value of a prtOutputIndex. For an output subunit that is serviced by this finisher device subunit, the bit position equal to 2 raised to the power of one less than the value of prtOutputIndex will be set. For example, a value of hexadecimal 49 indicates the output subunits with a prtOutputIndex of 1, 4 or 7 can be serviced by this finisher device subunit. The most significant bit position SHALL not be used, which allows a maximum of 31 output subunits to be defined." ::= { finDeviceEntry 8 } finDeviceStatus OBJECT-TYPE SYNTAX PrtSubUnitStatusTC MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current status of this finisher device subunit." ::= { finDeviceEntry 9 } finDeviceDescription OBJECT-TYPE SYNTAX OCTET STRING(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "A free form text description of this device subunit in the localization specified by prtGeneralCurrentLocalization." ::= { finDeviceEntry 10 } -- The Extended Finisher Device Group -- -- This group is optional. However, to claim conformance to -- this group, it is necessary to implement every object in the -- group. finDeviceName OBJECT-TYPE SYNTAX OCTET STRING(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The name assigned to this finisher device subunit." ::= { finDeviceEntry 11 } finDeviceVendorName OBJECT-TYPE SYNTAX OCTET STRING(0..63) MAX-ACCESS read-only STATUS current Bergman, Lewis Informational [page 14] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 DESCRIPTION "The vendor name of this finisher device subunit." ::= { finDeviceEntry 12 } finDeviceModel OBJECT-TYPE SYNTAX OCTET STRING(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The model name of this finisher device subunit." ::= { finDeviceEntry 13 } finDeviceVersion OBJECT-TYPE SYNTAX OCTET STRING(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The version string for this finisher device subunit." ::= { finDeviceEntry 14 } finDeviceSerialNumber OBJECT-TYPE SYNTAX OCTET STRING(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number assigned to this finisher device subunit." ::= { finDeviceEntry 15 } -- Finisher Supply Group -- -- A finisher may have one or more supplies associated with it. -- For example a finisher may use both binding tape and stitching -- wire supplies. A finisher may also have more than one source -- for a given type of supply e.g. multiple supply sources of ink -- for imprinters. finSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF FinSupplyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each unique source of supply is an entry in the finisher supply table. Each supply entry has its own characteristics associated with it such as colorant and current supply level." ::= { finisherMIB 19 } finSupplyEntry OBJECT-TYPE SYNTAX FinSupplyEntry Bergman, Lewis Informational [page 15] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of finisher devices, with their associated supplies and supplies characteristics." INDEX { hrDeviceIndex, finDeviceIndex, finSupplyIndex } ::= { finSupplyTable 1 } FinSupplyEntry ::= SEQUENCE { finSupplyIndex Integer32, finSupplyClass PrtMarkerSuppliesClassTC, finSupplyType FinSupplyTypeTC, finSupplyDescription OCTET STRING, finSupplyUnit PrtMarkerSuppliesSupplyUnitTC, finSupplyMaxCapacity Integer32, finSupplyCurrentLevel Integer32, finSupplyColorantValue OCTET STRING } finSupplyIndex OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value used by a finisher to identify this supply container/receptacle. Although these values may change due to a major reconfiguration of the finisher (e.g. the addition of new supply sources to the finisher), values are normally expected to remain stable across successive power cycles." ::= { finSupplyEntry 1 } finSupplyClass OBJECT-TYPE SYNTAX PrtMarkerSuppliesClassTC MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates whether this supply entity represents a supply that is consumed or a container that is filled." ::= { finSupplyEntry 2 } finSupplyType OBJECT-TYPE SYNTAX FinSupplyTypeTC MAX-ACCESS read-only STATUS current DESCRIPTION "The type of this supply." ::= { finSupplyEntry 3 } finSupplyDescription OBJECT-TYPE Bergman, Lewis Informational [page 16] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 SYNTAX OCTET STRING(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The description of this supply/receptacle in text useful for operators and management applications." ::= { finSupplyEntry 4 } finSupplyUnit OBJECT-TYPE SYNTAX PrtMarkerSuppliesSupplyUnitTC MAX-ACCESS read-only STATUS current DESCRIPTION "Unit of measure of this finisher supply container or receptacle." ::= { finSupplyEntry 5 } finSupplyMaxCapacity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum capacity of this supply container/receptacle expressed in Supply Units. If this supply container/ receptacle can reliably sense this value, the value is sensed and is read-only; otherwise the value may be written by a control panel or management application. The value (-1) means other and places no restrictions on this parameter. The value (-2) means unknown." ::= { finSupplyEntry 6 } finSupplyCurrentLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense this value, the value is sensed and is read-only; otherwise the value may be written by a control panel or management application. The value (-1) means other and places no restrictions on this parameter. The value (-2) means unknown." ::= { finSupplyEntry 7 } Bergman, Lewis Informational [page 17] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 -- Capacity Attribute Relationships -- -- MEDIA INPUT MEASUREMENT -- -- _______ | | -- | | | -- | | | | -- | |_ _ _ _ _ _ _ _ _ _| ________________ |direction -- | | | | v -- MaxCapacity | | | -- | | Sheets remaining | CurrentLevel -- | | | | -- v | | v -- ------- +-------------------+ ------- finSupplyColorantValue OBJECT-TYPE SYNTAX OCTET STRING(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the color of this colorant using standardized string names from ISO 10175 (DPA) and ISO 10180 (SPDL) which are: other, unknown, white, red, green, blue, cyan, magenta, yellow and black. Implementors may add additional string values. The naming conventions in ISO 9070 are recommended in order to avoid potential name clashes." ::= { finSupplyEntry 8 } -- Finisher Supply Media Input Group -- -- A finisher device may have one or more associated supply media -- inputs. Each entry in this table defines an input for a -- supply media type such as inserts, covers, etc. finSupplyMediaInputTable OBJECT-TYPE SYNTAX SEQUENCE OF FinSupplyMediaInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The input subunits associated with a finisher supply media are each represented by an entry in this table." ::= { finisherMIB 20 } finSupplyMediaInputEntry OBJECT-TYPE SYNTAX FinSupplyMediaInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of finisher supply media input subunit features and Bergman, Lewis Informational [page 18] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 characteristics." INDEX { hrDeviceIndex, finDeviceIndex, finSupplyIndex, finSupplyMediaInputIndex } ::= { finSupplyMediaInputTable 1 } FinSupplyMediaInputEntry ::= SEQUENCE { finSupplyMediaInputIndex Integer32, finSupplyMediaInputType PrtInputTypeTC, finSupplyMediaInputDimUnit PrtCapacityUnitTC, finSupplyMediaInputMediaDimFeedDir Integer32, finSupplyMediaInputMediaDimXFeedDir Integer32, finSupplyMediaInputStatus PrtSubUnitStatusTC, finSupplyMediaInputMediaName OCTET STRING, finSupplyMediaInputName OCTET STRING, finSupplyMediaInputVendorName OCTET STRING, finSupplyMediaInputModel OCTET STRING, finSupplyMediaInputVersion OCTET STRING, finSupplyMediaInputSerialNumber OCTET STRING, finSupplyMediaInputDescription OCTET STRING, finSupplyMediaInputSecurity PresentOnOff, finSupplyMediaInputMediaWeight Integer32, finSupplyMediaInputMediaThickness Integer32, finSupplyMediaInputMediaType OCTET STRING, finSupplyMediaInputMediaColor OCTET STRING, finSupplyMediaInputMediaFormParts Integer32 finSupplyMediaInputIndex OBJECT-TYPE SYNTAX Integer32(0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value used by a finisher to identify this supply media input subunit. Although these values may change due to a major reconfiguration of the finisher (e.g. the addition of new supply media input sources to the finisher), values are normally expected to remain stable across successive power cycles." ::= { finSupplyMediaInputEntry 1 } finSupplyMediaInputType OBJECT-TYPE SYNTAX PrtInputTypeTC MAX-ACCESS read-only STATUS current DESCRIPTION "The type of technology (discriminated primarily according to the feeder mechanism type) employed by the input subunit." ::= { finSupplyMediaInputEntry 2 } finSupplyMediaInputDimUnit OBJECT-TYPE SYNTAX PrtCapacityUnitTC Bergman, Lewis Informational [page 19] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 MAX-ACCESS read-only STATUS current DESCRIPTION "The unit of measure for specifying dimensional values for this input device." ::= { finSupplyMediaInputEntry 3 } finSupplyMediaInputMediaDimFeedDir OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the value of the dimension in the feed direction of the media that is placed or will be placed in this input device. Feed dimension measurements are taken parallel to the feed direction of the device and measured in finSupplyMediaInputDimUnits. If this input device can reliably sense this value, the value is sensed and is read-only access. Otherwise the value is read-write access and may be written by management or control panel applications. The value (-1) means other and specifically indicates that this device places no restrictions on this parameter. The value (-2) indicates unknown. " ::= { finSupplyMediaInputEntry 4 } finSupplyMediaInputMediaDimXFeedDir OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the value of the dimension across the feed direction of the media that is placed or will be placed in this input device. The cross feed direction is ninety degrees relative to the feed direction on this device and measured in finSupplyMediaInputDimUnits. If this input device can reliably sense this value, the value is sensed and is read-only access. Otherwise the value is read-write access and may be written by management or control panel applications. The value (-1) means other and specifically indicates that this device places no restrictions on this parameter. The value (-2) indicates unknown. " ::= { finSupplyMediaInputEntry 5 } finSupplyMediaInputStatus OBJECT-TYPE SYNTAX PrtSubUnitStatusTC MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the current status of this input device." Bergman, Lewis Informational [page 20] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 ::= { finSupplyMediaInputEntry 6 } finSupplyMediaInputMediaName OBJECT-TYPE SYNTAX OCTET STRING(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the current media contained in this input device. Examples are Print Job Output A, Triple A Billing Statements or ISO standard names." ::= { finSupplyMediaInputEntry 7 } -- Finisher Supply Media, Extended Input Group -- -- This group is optional. However, to claim conformance to this -- group it is necessary to implement every object in the group. -- -- This group defines objects that augment the -- finSupplyMediaInputType object for this input subunit. finSupplyMediaInputName OBJECT-TYPE SYNTAX DisplayString(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The name assigned to this input subunit." ::= { finSupplyMediaInputEntry 8 } finSupplyMediaInputVendorName OBJECT-TYPE SYNTAX DisplayString(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor name of this input subunit component." ::= { finSupplyMediaInputEntry 9 } finSupplyMediaInputVendorModel OBJECT-TYPE SYNTAX DisplayString(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The model name of this input subunit." ::= { finSupplyMediaInputEntry 10 } finSupplyMediaInputVersion OBJECT-TYPE SYNTAX DisplayString(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The version string for this input subunit." Bergman, Lewis Informational [page 21] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 ::= { finSupplyMediaInputEntry 11 } finSupplyMediaInputSerialNumber OBJECT-TYPE SYNTAX DisplayString(0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number assigned to this input subunit." ::= { finSupplyMediaInputEntry 12 } finSupplyMediaInputDescription OBJECT-TYPE SYNTAX DisplayString(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "A free form text description of this input subunit in the localization specified by prtGeneralCurrentLocalization." ::= { finSupplyMediaInputEntry 13 } finSupplyMediaInputSecurity OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if this subunit has some security associated with it." ::= { finSupplyMediaInputEntry 14 } -- Finisher Supply Media, Extended Media Input Group -- -- This group is optional. However, to claim conformance to this -- group it is necessary to implement every object in the group. -- -- This group defines objects that augment the -- finSupplyMediaInputType object for this input subunit. -- -- The Extended Media Input Group objects support identification -- of media installed or available for use on a finisher device. -- Medium resources are identified by name. and include a -- collection of characteristic attributes that may further be -- used for selection or management of them. finSupplyMediaInputMediaWeight OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The weight of the media associated with this Input device in grams per meter squared. The value (-1) means other Bergman, Lewis Informational [page 22] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 and specifically indicates that the device places no restriction on this parameter. The value (-2) means unknown. This object can be used to calculate the weight of individual pages processed by the document finisher. This value, when multiplied by the number of pages in a finished set, can be used to calculate the weight of a set before it is inserted into a mailing envelope." ::= { finSupplyMediaInputEntry 16 } finSupplyMediaInputMediaThickness OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the thickness of the input media processed by this document input subunit measured in micrometers. This value may be used by devices (or operators) to set up proper machine tolerances for the feeder operation. The value (-2) indicates that the media thickness is unknown or not used in the setup for this input subunit." ::= { finSupplyMediaInputEntry 17 } finSupplyMediaInputMediaType OBJECT-TYPE SYNTAX DisplayString(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the type of the type of medium associated with this input subunit. Valid values are standardized strings from ISO 10175 (DPA) and ISO 10180 (SPDL) which are: stationary, transparency, envelope, envelope-plain, envelope window, continuous-long, continuous-short, tab-stock, labels, multi-layer." ::= { finSupplyMediaInputEntry 18 } finSupplyMediaInputMediaFormParts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of parts associated with the media associated with this input subunit if the media is a multi-part form. The value (-1) means other and specifically indicates the device places no restrictions on this parameter. The value (-2) means unknown." ::= { finSupplyMediaInputEntry 19 } Bergman, Lewis Informational [page 23] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 -- Finisher Device Attribute Group -- -- A finisher device subunit may have one or more parameters that -- cannot be specified by any other objects in the MIB. The -- Device Attribute group allows the definition of these -- parameters. finDeviceAttributeTable OBJECT-TYPE SYNTAX SEQUENCE OF FinDeviceAttributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The attribute table defines special parameters that are applicable only to a minority of the finisher devices. An attribute table entry is used, rather than unique objects, to minimize the number of MIB objects and to allow for expansion without the addition of MIB objects. Each finisher device is represented by a separate row in the device subunit attribute table." ::= { finisherMIB 21 } finDeviceAttributeEntry OBJECT-TYPE SYNTAX FinDeviceAttributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry defines a finisher function parameter that cannot be represented by an object in the finisher device subunit table." INDEX { hrDeviceIndex, finDeviceIndex, finDeviceAttributeTypeIndex } ::= { finDeviceAttributeTable 1 } FinDeviceAttributeEntry ::= SEQUENCE { finDeviceAttributeTypeIndex FinAttributeTypeTC, finDeviceAttributeInstanceIndex Integer32, finDeviceAttributeValueAsInteger Integer32, finDeviceAttributeValueAsOctets OCTET STRING } finDeviceAttributeTypeIndex OBJECT-TYPE SYNTAX FinAttributeTypeTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the attribute type represented by this row." ::= { finDeviceAttributeEntry 1 } finDeviceAttributeInstanceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible Bergman, Lewis Informational [page 24] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 STATUS current DESCRIPTION "An index that allows the discrimination of an attribute instance when the same attribute occurs multiple times for a specific instance of a finisher function. The value of this index shall be 1 if only a single instance of the attribute occurs for the specific finisher function." ::= { finDeviceAttributeEntry 2 } finDeviceAttributeValueAsInteger OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the integer value of the attribute. The value of the attribute is represented as an integer if the finAttributeTypeTC description for the attribute has the tag 'INTEGER:'. Depending upon the attribute enum definition, this object may be either an integer, a counter, an index, or an enum. Attributes for which the concept of an integer value is not meaningful SHALL return a value of -1 for this attribute." ::= { finDeviceAttributeEntry 3 } finDeviceAttributeValueAsOctets OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "Contains the octet string value of the attribute. The value of the attribute is represented as a string if the finAttributeTypeTC description for the attribute has the tag 'OCTETS:'. Depending upon the attribute enum definition, this object may be either a coded character set string (text) or a binary octet string. Attributes for which the concept of an octet string value is not meaningful SHALL contain a zero length string." ::= { finDeviceAttributeEntry 4 } END Bergman, Lewis Informational [page 25] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 5.0 REFERENCES [PRTMIB] The Printer MIB, RFC 1759, IETF standards track document. [LMO] Large Mailing Operations Specification, DMTF. See http://www.dmtf.org/tech/apps.html [DPA] ISO/IEC 10175 Document Printing Application (DPA). See ftp://ftp.pwg.org/pub/pwg/dpa/ [IPP] Internet Printing Protocol/1.0: Model and Semantics, work in progress on the IETF standards track. See draft-ietf-ipp-model- 09.txt. 6.0 AUTHORS This document was created with significant contributions from the following individuals. Ron Bergman (Editor) Dataproducts Corp. 1757 Tapo Canyon Road Simi Valley, CA 93063-3394 Phone: 805-578-4421 Fax: 805-578-4001 Email: rbergman@dpc.com Harry Lewis (chairman) IBM Corporation 6300 Diagonal Hwy Boulder, CO 80301 Phone: (303) 924-5337 Fax: (303) 924-4662 Email: harryl@us.ibm.com Send comments to the Printer Working Group (PWG) using the Finisher MIB Project (FIN) Mailing List: fin@pwg.org For further information, access the PWG web page under "FIN": http://www.pwg.org/ Bergman, Lewis Informational [page 26] INTERNET-DRAFT Printer Finishing MIB February 19, 1998 Other Participants: Chuck Adams - Tektronix Andy Davidson - Tektronix Mabry Dozier - QMS Lee Ferrel - Canon Paul Gloger - Xerox Richard Hart - Digital Tom Hastings - Xerox Scott Isaacson - Novell David Kellerman - Northlake Software Henrik Holst - i-data International Rick Landau - Digital Jay Martin - Underscore Gary Padlipski - Xerox Bob Pentecost - HP Stuart Rowley - Kyocera Yuki Sacchi - Japan Computer Industry Philip Thambidunai - Okidata William Wagner - DPI/Osicom Chris Wellens - Interworking Labs Don Wright - Lexmark Lloyd Young - Lexmark Bergman, Lewis Informational [page 27]