!#$ 1 Open-Printing Embedded Print
!#$ 2 Job Ticket
!#$ 3 Text
!#$ 4 Version 1.00.00
!#$ 5
!#$ 6 Comment: Sample OP Embedded Job Ticket
!#$ 7 Comment: Glen W. Petrie / 2006.10.18
!#$ 8
!#$ 9 DATA:
# <*** Missing attributes are "Not Set" & solution defaults used.***>
# <*** No ordering is implied or required. ***>
author: "Glen W. Petrie"
version: 1.00.00
charSet: "ASCII"
comment: "Sample OP Job Ticket for Embedded POSIX Print"
typeVers: OP_JTV_OP_1_0
apiCharSet: "ASCII"
apiVersion: 1.00.00
fidelity: OP_PST_ON
lengthUnits:OP_LUN_TEN_THOUSANDTHS_OF_INCHES
company: "The World of Graphics"
contactUri: "None"
details: " "
name: "Glen W. Petrie"
roles: "Software Developer", "Customer", "Author"
jobId: "abcd"
# <*** --------------------------------------------------------- ***>
# <*** Print Job(s) for this ticket. ***>
# <*** --------------------------------------------------------- ***>
author: "Glen W. Petrie"
name: "Sample Embedded POSIX Print Job"
comment: "Sample for use by developers/creators/authors."
operMessage:"This is a no charge job. To be used for training.
Please read carefully. This is a sample job."
priority: 1 # <*** scale for sample: 0=lowest, 10=highest***>
format: TEXT
language: English
compression:OP_CMP_NONE
# <*** Job Objects ***>
# <*** ----------------------------------------------------- ***>
docId: "myDocument"
includePagesId: "AllPages"
outputPagesId: "AllPages"
distinationId: "myPrintBox"
contactInfoId: "Test"
subscrId: "123"
sepShtId: "None"
forcePageId: "None"
insertSheetId: "Formated"
holeMkId: "3OnSide"
mediaId: "JobDefault"
foldId: "InHalf"
stitchId: "OnTop"
# <*** Policies and Actions ***>
# <*** ----------------------------------------------------- ***>
collate: OP_CLT_SHEET_AND_DOC
feedOrient: OP_FDO_SHORT_EDGE_FIRST
presentationDir: OP_PRD_TO_LEFT_TO_BOTTOM
fitPolicy: OP_FPL_CLIP_TO_PAGE
holdPolicy: OP_HLD_INDEFINITE
outputBin: OP_OBN_STACKER
outputDelivery: OP_PGD_SAME_ORDER_FACE_UP
jogOffset: OP_JGO_ALTERNATE
binding: EXT: OP_BDT_SPECIAL
sides: OP_SSD_FRONT
# <*** Print Format Attributes ***>
# <*** ----------------------------------------------------- ***>
xRes: 33 # <*** 1/10,000" = 1/300 Dpi ***>
yRes: 33 # <*** 1/10,000" = 1/300 Dpi ***>
quality: OP_PQL_NORMAL
xScale: 1000 # <*** 1.000 ***>
yScale: 1000 # <*** 1.000 ***>
rotation: OP_ROT_180_DEGREES
copies: 3
xNumUp: 1
yNumUp: 1
# <*** Image Attributes ***>
# <*** ----------------------------------------------------- ***>
xImageAlign: OP_IAX_LEFT
yImageAlign: OP_IAY_TOP
xImageShiftBack: 0
yImageShiftBack: 0
xImageShiftFront: 0
yImageShiftFront: 0
# <*** Margins ***>
# <*** ----------------------------------------------------- ***>
topMargin: 5000 # <*** 0.5" ***>
leftMargin: 5000 # <*** 0.5" ***>
bottomMargin: 5000 # <*** 0.5" ***>
rightMargin: 5000 # <*** 0.5" ***>
# <*** Accounting ***>
# <*** ----------------------------------------------------- ***>
billingCode: "Alpha 1"
client: "me, myself and I"
# <*** --------------------------------------------------------- ***>
# <*** Print Document(s) for this Job. ***>
# <*** --------------------------------------------------------- ***>
docURI: "/usr/glen/instructions.txt"
docPageRange: "AllPages"
docForcePage: "NoForcePages"
docInsertSheet: "NoInsertPages"
# <*** --------------------------------------------------------- ***>
# <*** Document Page Range ***>
# <*** --------------------------------------------------------- ***>
lower: 0
upper: -1 # <*** Indicate all pages ***>
# <*** --------------------------------------------------------- ***>
# <*** Document Force Page ***>
# <*** --------------------------------------------------------- ***>
xPos: 0
yPos: 0
page: 0
side: OP_SSD_NOT_SET
# <*** --------------------------------------------------------- ***>
# <*** Document Insert Sheet ***>
# <*** --------------------------------------------------------- ***>
content: OP_ISC_BLANK
count: 0
mediaId: "NULL" # <*** NULL => no object ***>
position: OP_POS_NOT_SET
insertPageRangeID: "NULL" # <*** NULL => no object ***>
# <*** --------------------------------------------------------- ***>
# <*** Include Pages ***>
# <*** --------------------------------------------------------- ***>
lower: 0
upper: -1 # <*** Indicate all pages ***>
# <*** --------------------------------------------------------- ***>
# <*** Output Pages ***>
# <*** --------------------------------------------------------- ***>
lower: 0
upper: -1 # <*** Indicate all pages ***>
# <*** --------------------------------------------------------- ***>
# <*** Destination ***>
# <*** --------------------------------------------------------- ***>
uri: "Mail Stop 720, Floor 20"
# <*** --------------------------------------------------------- ***>
# <*** Contact Info ***>
# <*** --------------------------------------------------------- ***>
address: "555 Any Street, Any Town, Any State 95555"
company: "The World of Graphics"
contactUri: "http://www.Any Web Page.com"
details: ""
name: "Glen W. Petrie"
roles: OP_CIR_CUSTOMER, OP_CIR_OWNER,
OP_CIR_APPROVER, OP_CIR_SENDER,
OP_CIR_SUPPLIER
# <*** --------------------------------------------------------- ***>
# <*** Subscription ***>
# <*** --------------------------------------------------------- ***>
charSet: "ASCII"
comment: "123 Subcription"
events: OP_SEV_JOB_COMPLETED,
OP_SEV_JOB_CONFIG_CHANGED,
OP_SEV_JOB_ERROR,
OP_SEV_JOB_STOPPED
jobAttr: "Simple Print Job", "No Duplex Printing"
naturalLang: "English"
sendToUri: "http://www.Any Web Page.com"
# <*** --------------------------------------------------------- ***>
# <*** Separation Sheet ***>
# <*** --------------------------------------------------------- ***>
message: "Job Separation"
action: OP_SSH_BETWEEN_DOC_COPIES,
OP_SSH_BETWEEN_JOB_COPIES
mediaId: "SepSheet"
# <*** --------------------------------------------------------- ***>
# <*** Separation Sheet: Media ***>
# <*** --------------------------------------------------------- ***>
name: "plain paper"
description: "plain paper"
type: OP_MTP_STATIONERY
precentRecycled: 37
sizeName: NA_LETTER_8o5X11IN
color: OP_MCL_LIGHT_BLUE
colorName: "Light Blue"
prePrinted: OP_MPP_BLANK
weight 30
frontCoating: OP_MCT_NONE
backCoating: OP_MCT_NONE
setCount: 0
holeCount: 0
manualFeed: OP_PST_OFF
feedTray: OP_ITN_AUTO_SELECT
# <*** --------------------------------------------------------- ***>
# <*** Force Page ***>
# <*** --------------------------------------------------------- ***>
xPos: 0
yPos: 0
page: 0
side: OP_SSD_NOT_SET
# <*** --------------------------------------------------------- ***>
# <*** Insert Sheet ***>
# <*** --------------------------------------------------------- ***>
content: OP_ISC_BLANK
count: 1
mediaId: "InsertSheets"
position: OP_POS_BEFORE
insertPageRangeId: "AllPages"
# <*** --------------------------------------------------------- ***>
# <*** Insert Sheet: Media ***>
# <*** --------------------------------------------------------- ***>
name: "plain paper"
description: "plain paper"
type: OP_MTP_STATIONERY
precentRecycled: 37
sizeName: NA_LETTER_8o5X11IN
color: OP_MCL_GOLDENROD
colorName: "Goldenrod"
prePrinted: OP_MPP_BLANK
weight 30
frontCoating: OP_MCT_NONE
backCoating: OP_MCT_NONE
setCount: 0
holeCount: 0
manualFeed: OP_PST_OFF
feedTray: OP_ITN_AUTO_SELECT
# <*** --------------------------------------------------------- ***>
# <*** Insert Sheet: Page Range ***>
# <*** --------------------------------------------------------- ***>
lower: 0
upper: -1 # <*** Indicate all pages ***>
# <*** --------------------------------------------------------- ***>
# <*** Hole Making ***>
# <*** --------------------------------------------------------- ***>
count: 3
refEdge: OP_RFE_LEFT
# <*** --------------------------------------------------------- ***>
# <*** Media (Job) ***>
# <*** --------------------------------------------------------- ***>
name: "plain paper"
description: "plain paper"
type: OP_MTP_STATIONERY
precentRecycled: 0
sizeName: NA_LETTER_8o5X11IN
color: OP_MCL_WHITE
colorName: "White"
prePrinted: OP_MPP_BLANK
weight 30
frontCoating: OP_MCT_NONE
backCoating: OP_MCT_NONE
setCount: 0
holeCount: 0
manualFeed: OP_PST_OFF
feedTray: OP_ITN_AUTO_SELECT
# <*** --------------------------------------------------------- ***>
# <*** Folding ***>
# <*** --------------------------------------------------------- ***>
foldType: OP_FDT_C
refEdge: OP_RFE_TOP
# <*** --------------------------------------------------------- ***>
# <*** Stitch ***>
# <*** --------------------------------------------------------- ***>
type: OP_STP_CORNER
count: 1
angle: 45
refEdge: OP_RFE_TOP
!#$10 END: